Custom brass machining: precision CNC brass parts
Connectors, fluids, bushes and precision parts: brass machining by CNC turning and milling. Online quote, excellent machinability.
Machined brass: precision, contact and machinability
Machined brass is preferred for technical components with fine dimensions, fittings, bushes and connectors where machinability shortens cycle times.
In CNC turning, brass allows clean threads, precise bores and careful finishes for small to medium runs.
Lusinage manufactures your brass parts from drawing or STEP file, with advice on alloy (CuZn39Pb3 and equivalents) and compatibility with fluids or electrical contact.
Advantages of brass in machining
Exceptional machinability
Short cycles, excellent for precision parts and repetitive runs.
Moderate wear resistance
Suited to bushes, slides and light-friction parts.
Appearance and contact
Careful finish for connectors, technical fasteners and visible parts.
Machining of fine details
Drilling, tapping and micro-geometries are well suited to turning-milling.
Typical machined brass parts
Brass bush, bearing and friction part
Fitting, nipple and fluid connector
Connector and contact part
Brass screw, nut and insert to drawing
Miniature valve body or manifold
Spacer and turned precision part
Watchmaking or instrumentation component
Connector prototype before production
Obsolete brass spare part
Brass machining: FAQ
Which types of brass do you machine?
Common free-cutting and binary brasses (CuZn39Pb3 type) per drawing; state any lead restriction and standard.
Brass for food contact?
Often reserved for stainless steel for direct contact; brass for technical fittings depending on regulations, to be validated case by case.
Turning or milling for my brass part?
Turning for round parts; milling for faces and multi-axis drilling.
Brass machining vs bronze?
Brass is more machinable; bronze is better for certain bearings; we guide you according to friction and load.
Polished finish possible?
Careful surface finishes in machining; specific polishing to be stated on the quote.
Repetitive small brass runs?
Yes. Brass is cost-effective on medium volumes thanks to cycle time.
Brass part with a fine thread?
Metric or special taps and threads per drawing.
Quote without a final quantity?
State a range or prototype; the quote can be adapted for a run.
Brass and corrosion?
Fine indoors; stainless steel recommended in marine or chlorinated environments.
Standard lead time for a brass part?
Often short for simple turned parts; confirmed on the quote.
Order your machined brass parts
Precision, finish and worldwide shipping, one-off part or run.
Get a quote